To ensure that the accuracy of your hardness testing equipment is maintained within the manufacturer's stated tolerances, it is important to perform periodic calibration. As a hardness tester measures the relative resistance of materials to denting, bending, or scratching, it can become misaligned over time, requiring calibration and adjustment to restore its reliability.
CCT Metrology, located in China and a division of CCT, provides a comprehensive range of services for your hardness testing equipment. We offer on-site calibration services for business customers located within a 100-mile radius of CCT, helping to ensure that your equipment is performing optimally and delivering accurate results.
At CCT Metrology, our highly skilled technicians are capable of calibrating a variety of hardness testers, including micro-hardness, Vickers, Knoop, and Rockwell, in accordance with the relevant ASTM standards. We offer calibration services for Rockwell hardness testers on C, B, A, and E scales, as well as for Superficial Rockwell hardness testers on 15, 30, and 45 N&T scales. During the calibration process, our technicians will determine the accuracy of the tester and make any necessary adjustments to bring it within the manufacturer's stated tolerances. Additionally, we offer preventative maintenance and repair services that can be performed concurrently with calibration. If needed, we can also assist you in purchasing new indenters, blocks, or hardness testers from our suppliers. Following calibration, you will receive a Certificate of Calibration containing all relevant information about the instrument and services performed.
Calibration services, including preventative maintenance and repairs, are provided for the following hardness tester models and scales:
· Rockwell scales C, B, A and E
· Superficial Rockwell to 15, 30, 45 N&T Scales
· Vickers & Knoop
· Brinell
· Micro-hardness testers
· Leeb testers
· Durometer testers
· Analog manual and digital load cell types
· Portable testers
For convenience, you can request a quote or arrange for service directly with our field coordinator at 400-1188-260 or shhgj@chinazbj.com
Calibrating a microscope is essential to ensure consistency and accuracy in measurements. Even two identical microscopes may have slightly different magnification factors if they are not calibrated regularly.
The scale on the eyepiece reticle does not have standard units of measure, and the values may change at different magnifications. Hence, it's crucial to calibrate the microscope reticle to determine the true measure of the scale markings. This involves comparing the reticle scale against a known value to calculate accurate measurements of objects viewed through the microscope.
CCT Metrology, located in China, has a team of field calibration specialists who can provide on-site microscope calibration services to our customers within a 100-mile radius of our facility. With over 20 years of experience, our technicians are fully qualified to perform reliable reticle calibration. In addition to reticle calibration, our standard microscope calibration services include cleaning and maintenance. We also offer routine cleaning and maintenance services without the calibration service. As the full-service calibration lab owned by CCT, the metal testing specialist, we adhere to a rigorous quality system and hold various credentials to ensure our reliability. Our microscope calibration service is accredited and the calibration results are traceable. Our Calibration Certificates include accreditation and traceability information, as well as "as found" and "as left" data, and detailed results to meet your quality requirements. Additionally, our Lab has the expertise and equipment to calibrate many other types of measuring instruments while on-site at your facility.
Request a quote or schedule on-site calibration services at 400-1188-260 or shhgj@chinazbj.com.
· Calibrating most microscope models
· Cleaning and maintenance
· traceability
· accreditation to ISO/IEC 17025
To maintain accurate and consistent industrial processes, manufacturers, heat treaters, and other businesses rely on industrial oven calibration. The service is crucial in ensuring that industrial furnaces and ovens perform correctly during production, as well as ensuring energy efficiency. Oven calibration services are used to validate the accuracy of oven or furnace temperatures and to confirm that devices used to control and monitor temperature are functioning properly.
CCT Metrology, located in China, is your go-to calibration expert for comprehensive oven calibration services, including temperature uniformity surveys, system accuracy tests, and temperature controller calibration, among others. These services are available for customers within a 100-mile radius of our lab and are carried out in accordance with NADCAP and AMS 2750D pyrometry requirements.
Our highly knowledgeable and experienced technicians adhere to the pyrometry requirements outlined in specification AMS 2750D, which establishes calibration procedures for temperature sensors, instrumentation, thermal processing equipment, system accuracy tests, and temperature uniformity surveys. Calibration of ovens and furnaces in compliance with these rigorous standards is essential for many suppliers, particularly those operating in the aerospace and commercial heat treating industries. Our processes satisfy specification requirements for heat treating facilities and laboratories seeking Nadcap accreditation.
In addition to temperature uniformity surveys and temperature controller calibration for ovens and furnaces, our highly skilled technicians at CCT Metrology can also perform these services on curing and drying ovens, batch furnaces, and tooling furnaces. We can also calibrate temperature controllers and readouts for any type of application.
Moreover, our field technicians can also provide on-site calibration services for surface plates, optical comparators, balances, hardness testers, microscopes, and many other measuring instruments.
After each calibration, we will provide you with a comprehensive Certificate of Calibration that documents all the work done. Additionally, we can send you a re-calibration reminder notice according to your desired frequency of calibration.
· Pyrometry
· Temperature Uniformity Survey
· System Accuracy Test
· Temperature Controller Calibration
· Calibration to AMS 2750D pyrometry and NADCAP requirements
Ensuring accurate measurements is essential for businesses that rely on precise weight readings for manufacturing and other processes. CCT Metrology, based in China, offers industrial scale calibration and balance calibration services to verify the accuracy of your equipment. Calibration involves comparing the output of the scale or balance against a standard value, and regular calibration is necessary to ensure ongoing accuracy. Our expert technicians are equipped to perform calibration services on both mechanical and digital models of scales and balances, whether in our environmentally-controlled laboratory or on-site at your location within a 100-mile radius of our facility. Calibration services are available for both industrial and laboratory equipment.
CCT Metrology is a subsidiary of CCT, a renowned provider of materials testing services since 2001. With our expertise in calibration services, you can have peace of mind knowing that your instruments will be thoroughly inspected and tested for accuracy. During the calibration process, our technicians will carefully examine your instruments and perform tests to verify linearity, repeatability, and eccentricity, ensuring that they meet all performance requirements. All results and relevant information will be recorded in a Calibration Certificate. We will also send you a reminder notice when it is time for recalibration, so you can stay on top of your instrument's maintenance schedule.
·
